Vertical traction TMR
Brief introduction:
The 1. blade is made of special alloy through heat treatment process, with high hardness and good wear resistance.
2. the whole machine adopts hydraulic drive, with high efficiency and low failure rate.
3., you can make unilateral or bilateral discharge, and configure the belt bar to increase the discharging speed and the uniformity of the material distribution.
4., size can be customized according to the size of the customer ranch, or the weight of the feed can be more accurately controlled by weighing.
5. low noise, low power consumption.
Vertical traction TMR specification:
volume m³ | long mm | wide mm | high mm | power hp | Number of churning Dragons |
| 6 | 4100 | 2000 | 2300 | 50-65 | 1 |
| 8 | 4400 | 2300 | 2700 | 80 | 1 |
| 10 | 4400 | 2600 | 2700 | 90 | 1 |
| 12 | 4500 | 2600 | 2900 | 100 | 1 |
| 12 | 5400 | 2600 | 2600 | 100 | 2 |
| 16 | 6365 | 2520 | 2620 | 120 | 2 |
| 21 | 6600 | 2550 | 2800 | 140 | 2 |
2018-3-16 本文被阅读 319 次